
Hotspots & Networking
SenseCAP M1
$622.80
The SenseCAP M1 is a ready-to-use indoor LoRaWAN gateway, compatible with the Helium network. It connects nearby LoRa sensors and devices over long range, so you can build low-cost wireless applications. Setup takes a few simple steps and only a few minutes. US915 version — for North America.
Buy Now opens the secure checkout preview. No payment is taken in demo.
Added — view cart
What it does
A ready-to-use indoor gateway for long-range, low-power wireless (LoRaWAN) networks. It provides wide-area coverage — described as miles of range — and data transmission capacity for nearby LoRa and LoRaWAN devices such as sensors, trackers, and other low-power endpoints, relaying their data over your internet connection to the long-range IoT network it is built for. Typical uses for the class of network it serves include agriculture monitoring, building and asset monitoring, and facility management. It is built on a mature single-board computer platform paired with a dedicated LoRa concentrator module, and is designed to run continuously with power consumption comparable to an ordinary light bulb. A built-in secure element chip provides hardware-based authentication for the device. Software is kept current with automatic over-the-air updates for both the operating system and the application software, with no manual update steps, and a built-in remote diagnostics mechanism allows faults to be investigated remotely when support is requested. Cooling is handled by an aluminium enclosure with a heatsink and an internal fan that manages temperature automatically, supporting long-term, stable operation. Optional accessories for the range include higher-gain fibreglass antennas, mounting pads, and outdoor enclosures, sold separately.
How it's used
- Check you have the correct regional version for where the gateway will operate (for example EU868 for Europe or US915 for North America) — the version, its antenna, and its power adapter are region-specific.
- Unbox the gateway, its region-matched antenna, its region-matched power adapter, the pre-fitted 64 GB MicroSD card, and the quick start guide.
- Attach the antenna to the antenna connector before powering the unit on.
- Place the gateway indoors in an elevated, clear position — next to a window or fixed on a wall are the suggested positions — away from obstructions where possible.
- Connect the power adapter and power the gateway up.
- Download its companion app on your smartphone and create an account.
- Press the gateway's button for about 5 seconds, until its LED changes to a slow flash, to enter Bluetooth pairing mode.
- In the app, start hotspot setup, choose this model from the list, and let the app find and connect to the gateway over Bluetooth.
- Connect the gateway to the internet: either select your Wi-Fi network in the app and enter its password, or connect an Ethernet cable instead.
- Complete registration in the app and confirm the gateway shows as connected and online.
Everyday use: leave the gateway powered on and connected so it continuously provides coverage and relays data for LoRaWAN devices in range. It needs no daily attention — updates install automatically, the fan and heatsink manage its temperature, and its status can be checked in its companion app. For broader coverage across an area, the guidance for this class of gateway is to space multiple gateways roughly 350–400 metres apart.
Key specs
- Processor: quad-core Cortex-A72 (ARM v8) 64-bit SoC at 1.5 GHz (BCM2711)
- RAM: 2 GB / 4 GB / 8 GB variants
- LoRa concentrator: WM1302 / WM1303 module with SX1302 / SX1303 baseband chip
- Storage: 64 GB MicroSD card
- Frequency versions: EU868 version 863–870 MHz; US915 version 902–928 MHz
- Additional frequency plans supported: AU915, KR920, and AS923 (select the version and plan for your region)
- Receiver sensitivity: -125 dBm at 125 kHz / SF7; -139 dBm at 125 kHz / SF12
- Transmit power: up to 26 dBm
- Antenna gain: US915: 2.6 dBi; EU868: 2.8 dBi
- Antenna impedance: 50 ohm
- Antenna radiation pattern: omni-directional
- Antenna connector: RP-SMA female ×1
- Wi-Fi: 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless
- Bluetooth: Bluetooth 5.0, BLE (used for setup)
- LoRaWAN: supports Class A and Class C devices
- Security: built-in ECC608 secure element chip for authentication
- Updates: automatic over-the-air updates (operating system and software)
- Input: DC 5 V, 3 A
- Interfaces: USB Type-C (power supply) ×1; Ethernet RJ45 ×1; RP-SMA female antenna connector ×1
- Operating temperature: 0 °C to 50 °C
- Relative humidity: 0%–90% (non-condensing)
- Heat dissipation: aluminium enclosure, heatsink, and cooling fan
- Enclosure rating: IP20 (indoor use)
- Certifications: FCC (US versions) / CE (EU versions)
- Size: about 15.2 × 10 × 4 cm
- Weight: about 378 g
- In the box: gateway ×1, region-matched antenna ×1, region-matched power adapter ×1, 64 GB MicroSD card ×1, quick start guide ×1
Good to know
This is an indoor gateway (IP20) and is not weather-sealed; outdoor use requires a suitable separate enclosure. The regional version matters: the frequency band, antenna, and power adapter must match the regulations and the network plan for the country where it is installed, and some countries or regions may not support the network it is built for at all, so check coverage and legality for your exact location before ordering. It needs a continuous internet connection (Ethernet or Wi-Fi) and continuous power to provide coverage. Coverage range in practice depends heavily on placement, building materials, and surrounding obstructions — an elevated position near a window gives the best result indoors.